EMANUEL 800 tons
EMANUEL 800 tons
Location:Borgone Susa, Italy
Specifications
Manufacturer | EMANUEL |
Year | 1985 |
Condition | Used |
Stock Number | 392 |
Ton | 800 |
Table - x (mm) | 3200 x 2000 |
Table - width (mm) | 3200 x2000 |
Slide - stroke (mm) | 1000 |
Subtype (DM/CDC) | DOUBLE UPRIGHT |
Conditions | WORKING |
Frame (H/C) | H |
Slide - width (mm) | 3200 x2000 |
Slide - x (mm) | 3200 x2000 |
Push points | 2 |
Piston rods | 2 |
Sled - number of guides | 4 |
Slide - number of guides | 4 |
Approach speed | 600 |
Approaching speed | 600 |
Working speed at 50% | 23 |
Working at 50% speed | 23 |
100% working speed | 46 |
Working at 100% speed | 46 |
Ascent speed | 500 |
Rising speed | 500 |
Light pms (mm) | 1800 |
Tdc span (mm) | 1800 |
Front light between uprights (mm) | 3200 |
Front span between the pillars (mm) | 3200 |
Side window between uprights (mm) | 900 |
Lateral window (mm) | 900 |
Blank holder cushion - total force (ton) | 250 |
Die cushion - total strength (ton) | 250 |
Blank holder cushion - width x depth (mm) | 2850x1650 |
Die cushion - XxY (mm) | 2850x1650 |
Blank holder cushion - movement (hydraulic/pneumatic/hydropneumatic) | PLUMBER |
Die cushion - number of cushions | 6 |
Blank holder cushion - number of cushions | 6 |
Die cushion - motion (hydraulic/pneumatic/hydropneumatic) | HYDRAULIC |
Blank holder cushion - stroke (mm) | 400 |
Die cushion - stroke (mm) | 400 |
External dimensions - width (mm) | 4700 |
External dimensions - X (mm) | 4700 |
External dimensions - depth (mm) | 2500 |
External dimensions - height (mm) | 6000 |
External dimensions - height above ground (mm) | 6000 |
External dimensions - Y (mm) | 2500 |
Weight (ton) | 100 |
Foundation (cm) | 160 |
Subtype (DM / CDC) | DOUBLE UPRIGHT |
Electrical components - number of motors | 2 |
Motor power (kw) | 180 |
Electrical panel conditions (working, missing, overhauled, to be overhauled) | WORKING, REFURBISHED |
Motor power (kW) | 180 |
Photocells (front/rear) | FRONT AND REAR |
Light barriers (frontal/posterior) | FRONTAL AND POSTERIOR |
Electrical panel conditions (working/missing/complete inspection/inspection required) | WORKING, COMPLETE INSPECTION |
Ascent rate | 500 |
Front gap between uprights (mm) | 3200 |
Side window between the uprights (mm) | 900 |
Blank holder cushion - movement (hydraulic / pneumatic / hydro-pneumatic) | PLUMBER |
Electrical components - No. of motors | 2 |
Photocells (front / rear) | FRONT AND REAR |
Conections electrical panel (working, missing, overhauled, to be overhauled) | WORKING, REVISED |